mo.stop

The function of adaptive lighting is already integrated in many upscale cars as standard equipment. It is also widely used in other countries, such as the USA, on motorcycles. Unfortunately, it has not (yet) been approved in Germany. In case of an emergency, the mo.stop does not have to be removed - simple reprogramming by dip switch is sufficient. The mo.stop can also be used as a flasher relay with an automatic shutdown.

Safety aspect: mo.stop as a flasher relay automatically switches off the flasher(s) after 20 seconds if set accordingly. No more accidental continuous flashing.

Use as brake light control

• Ultra small and lightweight, practically just a piece of cable with a tiny candy-sized device
• Routing in the wiring harness simply in series with the brake light
• Adjustable as flasher relay with automatic shutdown
• 6 different adjustable light/flashing variants for brake light
• Almost load-independent (from 1 W) - therefore suitable for almost all LED brake lights (from 1 W) or conventional brake light lamps
• Super simple connection via two cables only - simply connect in series
• Short-circuit proof - Automatic overload protection - Fuse against voltage peaks from the vehicle electrical system
• No heat generation during operation
• Also suitable for 6 V brake light or turn signal
• Immediate, lossless response of the brake light
• Housing is solid and sealed: absolutely waterproof and vibration resistant

Use as flasher relay (without/with cut-off)

• Always constant flashing frequency, therefore suitable for almost all LED turn signals (from 1W), all micro turn signals, halogen turn signals, 10 watt turn signals and 21 watt turn signals, etc.
• No clunky standard relays - ideal solution for custom bikes and conversions with limited space. For example, works with 4 turn signals or 2 handlebar end turn signals etc.
• Super simple connection via two cables only - simply connect in a series

• Housing L x W x H: 26 mm x 12 mm x 10 mm / 1.02" x 0.472" x 0.393"
• Length connection cable: approx. 2 x 50 mm / 1.97"
• Weight: approx. 6 g / 0.212 oz

• 1 mo-stop relay unit